Mickey thompson aluminum rods

Check in with your pals daily. What's on your mind?
User avatar
stimpy
Posts: 1129
Joined: Sun Jul 23, 2006 12:33 am
Location: MP 127 on I-80

Mickey thompson aluminum rods

Postby stimpy » Thu May 26, 2011 4:10 pm

I have a incomplete set of aluminum Mickey thompson Poncho rods from a old blown up 421 alky motor I bought , anyone have a Idea who manufactuered them for Mickey as they are realy nice , I know I doubt I can get the M/t name on them just want find out the history of them . theres a code of wrc 80000 on the back and they use sps H1452 rod bolts and a forged star and big V on the front .

any Ideas ??
the Groom that went Vroom At DLN IV

User avatar
Rapid Randy Baker
Posts: 8075
Joined: Thu Feb 23, 2006 9:05 am
Location: Des Moines, Iowa
Contact:

Re: Mickey thompson aluminum rods

Postby Rapid Randy Baker » Sun May 29, 2011 4:51 pm

On the funnycar board there is a group who have built a pont funnycar. They have what appears to be a lot of Pontiac info. I would try them or google for the Pontiac car club and try the members there. Hope it works out,

Rapid
NITRO PILOT

[url]http://.www.rapidrandy.net[/url]

User avatar
jim sanders
Posts: 8740
Joined: Fri Feb 24, 2006 8:54 am
Location: St.Louis Mo.
Contact:

Re: Mickey thompson aluminum rods

Postby jim sanders » Sun May 29, 2011 6:22 pm

these guys stimpy is the group Randy mentioned i believe
http://www.allpontiac.com/
GOOD TO GO !!
Uncle Curt Wasson album
[url=http://www.glowfoto.com/users2/gatorgumbo][img]http://www.glowfoto.com/siteimages/linktogallery.gif[/img][/url]

User avatar
stimpy
Posts: 1129
Joined: Sun Jul 23, 2006 12:33 am
Location: MP 127 on I-80

Re: Mickey thompson aluminum rods

Postby stimpy » Sun May 29, 2011 6:26 pm

On the funnycar board there is a group who have built a pont funnycar. They have what appears to be a lot of Pontiac info. I would try them or google for the Pontiac car club and try the members there. Hope it works out,

Rapid
um not to be a idiot but I am . what board is that ?? I know mongo but he I think is using a BBC in his . and robertson is using a iron indian block and aftermarket rods .( I believe GRP's ) been talking to alof of older Poncho Guys and coming up with nothing .
the Groom that went Vroom At DLN IV

User avatar
Rapid Randy Baker
Posts: 8075
Joined: Thu Feb 23, 2006 9:05 am
Location: Des Moines, Iowa
Contact:

Re: Mickey thompson aluminum rods

Postby Rapid Randy Baker » Sun May 29, 2011 7:15 pm

Here is a link to the thread. Eric Larson who runs the Grocery Getter Wagon with his friend would be a good contact to ask.

http://classicfunnycarboard.com/CFB/ind ... 251806#new

This is the Classic Funnycar board owned by Justin Grant. It doesn't have a lot of Pont stuff on it, but there is a thread or two about the boss bird Pont powered funnycar. That is why I thought you might get an email address from one of the guys who know about this car and the details.

Mongo does have a BBC in his, but keeps up with the Poncho stuff alot. He knows of some pont board that he goes to quite often.

Rapid
NITRO PILOT

[url]http://.www.rapidrandy.net[/url]

User avatar
stimpy
Posts: 1129
Joined: Sun Jul 23, 2006 12:33 am
Location: MP 127 on I-80

Re: Mickey thompson aluminum rods

Postby stimpy » Sun May 29, 2011 8:56 pm

Here is a link to the thread. Eric Larson who runs the Grocery Getter Wagon with his friend would be a good contact to ask.

http://classicfunnycarboard.com/CFB/ind ... 251806#new

This is the Classic Funnycar board owned by Justin Grant. It doesn't have a lot of Pont stuff on it, but there is a thread or two about the boss bird Pont powered funnycar. That is why I thought you might get an email address from one of the guys who know about this car and the details.

Mongo does have a BBC in his, but keeps up with the Poncho stuff alot. He knows of some pont board that he goes to quite often.

Rapid
ya I know mongo from that board . and have left that board due to some politics that the owner needs to resolve . if you talk to him tell him I said hi! ( was stimpy there too ) and thanks for the info Randy . now get back to work on the car!!!
the Groom that went Vroom At DLN IV


Return to “What's Up”

Who is online

Users browsing this forum: No registered users and 3 guests

cron