NO OIL pressure

From famous pros to weekend warriors, our friendly members will help answer your tech questions.
Mr. Monte
Posts:19
Joined:Wed Apr 09, 2008 12:38 pm
Location:Minnesota

Postby Mr. Monte » Mon Apr 21, 2008 10:27 am

it could have been way worse than it was. We didnt see any other damage so I think I dodged a bullet there.
Nobody wins alone. Jimmy

Mr. Monte
Posts:19
Joined:Wed Apr 09, 2008 12:38 pm
Location:Minnesota

Postby Mr. Monte » Thu Apr 24, 2008 11:23 am

We did find a few other problems so we're going to throw a set of rings in #7 and do a valve job. Also going to check the geometry of the intake.
Nobody wins alone. Jimmy

Mr. Monte
Posts:19
Joined:Wed Apr 09, 2008 12:38 pm
Location:Minnesota

Postby Mr. Monte » Wed Apr 30, 2008 4:45 pm

Yup, sure as heck the intake Brodix HV1000 was tight on the top and way open on the bottom. Anyway , my problems are minimal compared to a friend who's motoe exploded on the same dyno I had mine on. to watch the video , go to Google, type in : my day at dyno, watch the video, its ugly, very ugly.
Nobody wins alone. Jimmy

User avatar
draglist
Site Admin
Posts:13792
Joined:Wed Feb 22, 2006 7:23 pm
Location:Waldorf MD
Contact:

Postby draglist » Wed Apr 30, 2008 5:26 pm

Good luck getting 'er all back together, Mr. Monte. bp
Bill Pratt
Draglist.com - Crowdsourced drag racing history.
Headlines and Results: http://www.draglist.com/
Drag Lists: http://www.draglist.com/draglist/draglist.php

Mr. Monte
Posts:19
Joined:Wed Apr 09, 2008 12:38 pm
Location:Minnesota

Postby Mr. Monte » Thu May 01, 2008 11:04 am

Thanks guys. wont be at the track for awhile tho. This weekend it'll be a blamy 39 degrees up here , Brrrrrrrr.
Nobody wins alone. Jimmy


Return to “Tech Questions”

Who is online

Users browsing this forum: No registered users and 7 guests