TH400 dual feeding

From famous pros to weekend warriors, our friendly members will help answer your tech questions.
chevyv8_power
Posts:5
Joined:Sun Mar 30, 2008 6:47 pm
TH400 dual feeding

Postby chevyv8_power » Fri Apr 25, 2008 10:42 pm

I have been reading a lot on the forums about dual feeding the direct clutch but am still not sure how to do it since there seems to be different ways of doing it. Plus I don't have a tranny to take apart and look at right now or a fluid diagram to look at. I have a TH400 with a B&M transpak(shift kit) and want to dual feed the direct clutch.

Is it as simple as plugging the feed to the accumulator in the valve body?

I did not remove any seals in the clutch or a pump sealing ring. The kit modified the accumulator if I remember right, I think replaced it with a different one and blocked a hole on the outside of the valve body. Also a hole was drilled larger on the separator plate but I think that was for 1-2 shift. I am trying to firm up the 2-3 shift.

Return to “Tech Questions”

Who is online

Users browsing this forum: No registered users and 18 guests

cron