Page 1 of 1

blower positioning

Posted: Mon Oct 01, 2012 9:46 am
by Fiddler
871 hampton blower standard helix standard opening on comp bds intake, will moving it back on manifold help performance? and if so how far should i move it back and what kind of hp gains could i expect? thanks for input Eddie aka fiddler

Re: blower positioning

Posted: Mon Oct 01, 2012 3:20 pm
by draglist
Welcome and good luck. Got lots of smart racers up here. Bill

Re: blower positioning

Posted: Wed Nov 14, 2012 1:29 pm
by SLICK VIC
The purpose of using a set back intake manifold is to help balance out the charge to each cylinder, yes it helps.
Now depending on your current intake ( openings, runners, and spacing ) moving the blower back on this intake itself may have no actual gains, and you will probly wind up needing a spacer plate to cover up any exposed opening at the front of your intake.
You would need a specific intake that was designed as, and for use as a set back,..Yes there are gains with this type of intake.

Vic