"Z" progress.

Here's where our individual members can fill us in on their racing, car building, or other exploits.
User avatar
pro70z28
Posts:11682
Joined:Fri Feb 24, 2006 12:17 pm
Re: "Z" progress.

Postby pro70z28 » Thu Feb 09, 2012 9:32 am

Just to give me a little incentive, & because I was getting a little nervous waiting so long, I applied for (personalized) plates for the "Z" yesterday. The name I picked is available so I don't expect any glitch's but I'll hold of giving out the name until I have the plates in hand. I'm not saying just because it's the government there will be any problems, but................ :|

:D
15th Annual DRAGLIST Nationals Sometime in 2020. Somewhere in the USA.

User avatar
Iowa Al
Posts:923
Joined:Sun Jul 16, 2006 3:32 pm
Location:Carlisle, Iowa

Re: "Z" progress.

Postby Iowa Al » Sun Feb 12, 2012 10:33 pm

I've got it!!!

Coal City Camaro
??????????
IA AL

User avatar
WildcatOne
Posts:6732
Joined:Sun Feb 26, 2006 10:17 am
Location:Houston, Texas
Contact:

Re: "Z" progress.

Postby WildcatOne » Thu Feb 16, 2012 5:53 pm

How many letters can it have?
Life Is Good!
http://www.peeweebowenband.com
Support Live Music!

User avatar
pro70z28
Posts:11682
Joined:Fri Feb 24, 2006 12:17 pm

Re: "Z" progress.

Postby pro70z28 » Thu Feb 16, 2012 6:43 pm

personal plates = 1, 2, 3, 4 or 5 letters followed by 1-99 or 6 letters & 1-9 Must have a space between the letters & numbers & you can't intermix numbers & letters. $76.00

Vanity plates = up to 7 letters & any number 1-999. $123.00


Mine falls under the personal plate category. I tried to stay away from a plate that would antagonize the local law enforcement people.

Available but not taken by be.

LOW ET Z

GRD LB ER

QUK TIME

QUICK 70

BIG CUBE


Although these are taken so.....
FAST Z

LOW ET

QUICK

SEE YA

HOL SHOT

SMOKEM

SHO TIME

SHO TYME

BOWTIE
15th Annual DRAGLIST Nationals Sometime in 2020. Somewhere in the USA.

User avatar
pro70z28
Posts:11682
Joined:Fri Feb 24, 2006 12:17 pm

Re: "Z" progress.

Postby pro70z28 » Thu Feb 16, 2012 6:52 pm

After flippin' through the different plate options, there's another way I wish I had gone, but then again it's a $163.00 deal so I guess I'll stick with what I've got.
15th Annual DRAGLIST Nationals Sometime in 2020. Somewhere in the USA.

User avatar
pro70z28
Posts:11682
Joined:Fri Feb 24, 2006 12:17 pm

Re: "Z" progress.

Postby pro70z28 » Thu Feb 23, 2012 1:52 pm

One last thing to finish it off. Every time I am out doing a job (well most of the time Ann E. Weigh), I tell myself I need a tool box for Geves for screws, tools, etc.
I also find myself finishing up jobs in the dark from time to time especially this time of year, so & took care of both problems by fabricating a lighted toolbox. The headlights are actually LED back up lights for a truck, but work perfect for this app. Side makers are LED too so they won't put too much of a strain on the alternator. Pretty bright they are, I replaced the front incandescent side makers on the trailer with the same units & they are definitely brighter. I also have some battery powered magnetic base LED flashers coming to keep in the truck that I can slap on equipment when I'm unloading/loading the trailer.
I have a fuel filter, oil/oil filter & air cleaner change to make & see if I can get the glow plugs to work, then I'm all done with this deal & ready for sign work this spring.
(I'll be trying it out Monday since I have a real estate sign to take down & reinstall on another property).

Image

Image
15th Annual DRAGLIST Nationals Sometime in 2020. Somewhere in the USA.

User avatar
Rapid Randy Baker
Posts:8075
Joined:Thu Feb 23, 2006 9:05 am
Location:Des Moines, Iowa
Contact:

Re: "Z" progress.

Postby Rapid Randy Baker » Thu Feb 23, 2012 4:58 pm

Looking Gooda 8)

Rapid
NITRO PILOT

[url]http://.www.rapidrandy.net[/url]

User avatar
Iowa Al
Posts:923
Joined:Sun Jul 16, 2006 3:32 pm
Location:Carlisle, Iowa

Re: "Z" progress.

Postby Iowa Al » Wed Feb 29, 2012 7:33 pm

Are any vanity plates free? We see so many of them when in
Illinois I really thought they might be free. If none are free, they
are a huge source of revenue for the state.
IA AL

User avatar
pro70z28
Posts:11682
Joined:Fri Feb 24, 2006 12:17 pm

Re: "Z" progress.

Postby pro70z28 » Wed Feb 29, 2012 7:41 pm

Nope not free. They cost about $175.00. Regular plates are around 100 bux so about $75.00 over & above regular plates.
15th Annual DRAGLIST Nationals Sometime in 2020. Somewhere in the USA.

User avatar
pro70z28
Posts:11682
Joined:Fri Feb 24, 2006 12:17 pm

Re: "Z" progress.

Postby pro70z28 » Sat Mar 03, 2012 11:37 pm

..............o.k. 1 more project & then it's time to get back on the "Z".
I have an issue with the stomp shear.
Image

It's in a small out building along with the lawn mower & other stuff like that, so there's not much space. Where the shear is setting now, I can shear sheet stock length wise but to sheer the end off a 4x I have to run the sheet up the opposing wall (small building). If I could turn it 90° it would work great for shearing off the end of a 4x, but I wouldn't have room to shear length wise. The deal weighs 2,600 lbs. so it's not something you can just spin around like a couch. For some reason the stop gauge only goes to 26''. I need it to go 48'' deep.
So, I'm building a truck that will be permanently bolted to the shear so I'll be able to move it wherever I need to cut whatever I need to cut, & I'm going to add a 48'' stop gauge so I don't have to use a tape measure for anything over 26''. Here's what I have so far....

Image
Got the basic frame tacked together. There's a couple places I'll have to cut back out once this much is welded together.

Image
Cutting reliefs in the hinge parts, soz' the hinges don't bind.

Image
Got the hinges all clamped together on a 3/4" shaft to keep everything aligned while tacking them together.

Image
Hinges all welded & tacked to the truck frame.

Image
Mocked up in what will be the down position. Picks the stomp shear up little over 1/2'' so it can be rolled around on the urethane wheels.

Image
I got a few linkage parts cut out & decided to call it a day..........''It's a day''.
15th Annual DRAGLIST Nationals Sometime in 2020. Somewhere in the USA.


Return to “Super Crew Team Reports”

Who is online

Users browsing this forum: No registered users and 26 guests

cron