| 12449
EDIT THIS!
|
Curt Swartz |
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
231 ) |
1992 - Category: ALKYFC, Type: CN, Class: TA/FC, Div: 2 |
| "Starr Rider III" Owned by Larry McBride
from
Greensboro, North Carolina
USA
| Crew Chief: Chris McBride |
| 1991 Pontiac Trans Am by
an Unknown chassis builder |
Powered by Supercharged Alcohol by Chris McBride with
3 speed manual transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1992 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1992 Records: |
1/4 Mile: 5.824 ET, 240.83 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.860 ET, 189.56 MPH |
| 1992 Average: |
1/4 Mile: 6.211 ET, 225.28 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 1992 Minimum: |
1/4 Mile: 6.711 ET, 208.50 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Curt Swartz photo from Bristol, TN, 1992. |
|
Submitted by Curt Swartz, Last updated on Tuesday, December 1, 2020, 02:16:21 PM by
Curt Swartz.
|
| 12450
EDIT THIS!
|
John Kilburg |
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
231 ) |
1992 - Category: ALKYFC, Type: CN, Class: TA/FC, Div: 2 |
| "Starr Rider III" Owned by Larry McBride
from
Greensboro, North Carolina
USA
| Crew Chief: Chris McBride |
| 1991 Chevrolet Beretta by
an Unknown chassis builder |
Powered by Supercharged Alcohol by Chris McBride with
3 speed manual transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1992 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1992 Records: |
1/4 Mile: 5.824 ET, 240.83 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.860 ET, 189.56 MPH |
| 1992 Average: |
1/4 Mile: 6.211 ET, 225.28 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 1992 Minimum: |
1/4 Mile: 6.711 ET, 208.50 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Photo from 1992 IHRA Darlington SC. |
|
Submitted by Curt Swartz, Last updated on Tuesday, December 1, 2020, 02:17:30 PM by
John Kilburg.
Approved by Bill Pratt. |
| 12451
EDIT THIS!
|
© Allen Tracy |
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
231 ) |
1993 - Category: ALKYFC, Type: CN, Class: TA/FC, Div: 2 |
| "Starr Rider III" Owned by Larry McBride
from
Greensboro, North Carolina
USA
| Crew Chief: Chris McBride |
| '92 Pontiac Trans Am by
Winston Cherry |
Powered by Supercharged Alcohol 528 JP-1 Hemi by Chris McBride with
3 speed manual transmission |
| 1/4 Mile ET: |
6.020 at Unknown |
1/4 Mile MPH: |
229.53 at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1993 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 72.95,
MPH 60.51 |
Entry is 0.96925 times average ET and 1.01887 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1993 Records: |
1/4 Mile: 5.795 ET, 245.49 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.860 ET, 189.56 MPH |
| 1993 Average: |
1/4 Mile: 6.211 ET, 225.28 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 1993 Minimum: |
1/4 Mile: 6.711 ET, 208.50 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Bowie qualified #6 at Bristol for the IHRA Springnationals with a 6.23/208.81. He was late in the first round, and his 6.22/208.33 lost to Joe Comella's 6.27/226. At the end of August, he was at Norwalk for the IHRA World Nationals. His 6.18/223.49 qualified #7. In round one, a 6.21/223.10 defeated Marc White's 6.28/220. He lost to eventual winner Tony Bartone in round two. |
|
Submitted by Draglist Archives, Last updated on Wednesday, June 15, 2022, 07:36:20 PM by
Ron Howard.
Approved by Super Crew. |
| 12452
EDIT THIS!
|
© Mike Sopko Photog Web |
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
231 ) |
1994 - Category: ALKYFC, Type: CN, Class: TA/FC, Div: 2 |
| "Starr Rider III" Owned by Larry McBride
from
Greensboro, North Carolina
USA
| Crew Chief: Chris McBride |
| '92 Pontiac Trans Am by
an Unknown chassis builder |
Powered by Supercharged Alcohol 528 JP-1 Hemi by Chris McBride with
3 speed manual transmission |
| 1/4 Mile ET: |
6.090 at IHRA Darlington SC 3/13/94 |
1/4 Mile MPH: |
233.82 at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1994 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 61.77,
MPH 69.87 |
Entry is 0.98052 times average ET and 1.03791 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1994 Records: |
1/4 Mile: 5.697 ET, 246.77 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.860 ET, 189.56 MPH |
| 1994 Average: |
1/4 Mile: 6.211 ET, 225.28 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 1994 Minimum: |
1/4 Mile: 6.711 ET, 208.50 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Rickie was at Darlington in March for the IHRA Winternationals. He qualified #2 with a 6.09/220.53, and in the opening round, his 6.23/221.40 beat Mike Preslar, but the car broke against Larry Dobbs in round two. |
|
Submitted by Draglist Archives, Last updated on Wednesday, December 22, 2021, 12:28:32 PM by
Ron Howard.
Approved by Super Crew. |
| 12453
EDIT THIS!
|
© Mike Sopko Photog Web |
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
231 ) |
1995 - Category: ALKYFC, Type: CN, Class: TA/FC, Div: 2 |
| "Starr Rider III" Owned by Larry McBride
from
Greensboro, North Carolina
USA
| Crew Chief: Chris McBride |
| '95 Pontiac Firebird by
an Unknown chassis builder |
Powered by Supercharged Alcohol 528 TFX Hemi by Chris McBride with
3 speed manual transmission |
| 1/4 Mile ET: |
6.016 at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1995 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 68.97,
MPH 00.00 |
Entry is 0.96860 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1995 Records: |
1/4 Mile: 5.697 ET, 250.34 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.860 ET, 189.56 MPH |
| 1995 Average: |
1/4 Mile: 6.211 ET, 225.28 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 1995 Minimum: |
1/4 Mile: 6.711 ET, 208.50 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
No notes on this entry. |
|
Submitted by Draglist Archives, Last updated on Tuesday, December 1, 2020, 02:17:06 PM by
Chris McBride.
Approved by Bill Pratt. |
| 12454
EDIT THIS!
|
No Photo (Edit this to add one!)
|
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
231 ) |
1996 - Category: ALKYFC, Type: CN, Class: TA/FC, Div: 2 |
| "Starr Rider III" Owned by Larry McBride
from
Greensboro, North Carolina
USA
| Crew Chief: Chris McBride |
| '95 Pontiac Firebird by
an Unknown chassis builder |
Powered by Supercharged Alcohol 528 TFX Hemi by Chris McBride with
3 speed manual transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1996 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1996 Records: |
1/4 Mile: 5.645 ET, 255.89 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.860 ET, 189.56 MPH |
| 1996 Average: |
1/4 Mile: 6.178 ET, 227.53 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 1996 Minimum: |
1/4 Mile: 6.711 ET, 209.46 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
No notes on this entry. |
|
Submitted by Draglist Archives, Last updated on Tuesday, December 1, 2020, 02:15:53 PM by
Super Crew.
|
| 12455
EDIT THIS!
|
No Photo (Edit this to add one!)
|
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
8) |
1999 - Category: ALKYFC, Type: CN, Class: Southern Fuel Coupes, Div: 2 |
| "Carolina Wildman" Owned by Jerry Davis
from
Greenwood, South Carolina
USA
| Crew Chief: Jerry Davis |
| '87 Chevrolet Camaro by
an Unknown chassis builder |
Powered by Supercharged Alcohol 517 Chrysler Hemi by Jerry Davis with
3 speed manual transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
4.670 at Unknown |
1/8 Mile MPH: |
146.00 at Unknown |
|
|
Entry's 1999 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.90,
MPH 00.88 |
Entry is 1.20051 times average ET and 0.81074 times average MPH |
|
| 1999 Records: |
1/4 Mile: 5.569 ET, 258.12 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.745 ET, 198.60 MPH |
| 1999 Average: |
1/4 Mile: 6.083 ET, 231.24 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 1999 Minimum: |
1/4 Mile: 6.597 ET, 213.22 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Southern Fuel Coupes |
|
Submitted by Draglist Archives, Last updated on Tuesday, December 8, 2020, 11:07:47 AM by
Danny White.
|
| 12456
EDIT THIS!
|
No Photo (Edit this to add one!)
|
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
8) |
2000 - Category: ALKYFC, Type: CN, Class: Southern Fuel Coupes, Div: 2 |
| "Carolina Wildman" Owned by Jerry Davis
from
Greenwood, South Carolina
USA
| Crew Chief: Jerry Davis |
| '87 Chevrolet Camaro by
an Unknown chassis builder |
Powered by Supercharged Alcohol 544 Keith Black Hemi by Jerry Davis with
3 speed manual transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 2000 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 2000 Records: |
1/4 Mile: 5.549 ET, 260.81 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.745 ET, 206.00 MPH |
| 2000 Average: |
1/4 Mile: 6.038 ET, 235.19 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 2000 Minimum: |
1/4 Mile: 6.538 ET, 217.20 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Southern Fuel Coupes |
|
Submitted by Draglist Archives, Last updated on Tuesday, December 8, 2020, 11:08:04 AM by
Super Crew.
|
| 12457
EDIT THIS!
|
No Photo (Edit this to add one!)
|
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
8) |
2001 - Category: ALKYFC, Type: CN, Class: Southern Fuel Coupes, Div: 2 |
| "Carolina Wildman" Owned by Jerry Davis
from
Greenwood, South Carolina
USA
| Crew Chief: Jerry Davis |
| '97 Chevrolet Camaro by
an Unknown chassis builder |
Powered by Supercharged Alcohol 544 Keith Black Hemi by Jerry Davis with
3 speed manual transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 2001 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 2001 Records: |
1/4 Mile: 5.549 ET, 260.81 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.745 ET, 206.00 MPH |
| 2001 Average: |
1/4 Mile: 6.038 ET, 235.19 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.890 ET, 180.08 MPH |
| 2001 Minimum: |
1/4 Mile: 6.538 ET, 217.20 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.220 ET, 166.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Southern Fuel Coupes |
|
Submitted by Draglist Archives, Last updated on Tuesday, December 8, 2020, 11:08:19 AM by
Super Crew.
|
| 12458
EDIT THIS!
|
No Photo (Edit this to add one!)
|
Rickey Bowie (M) from
Greenwood, South Carolina
USA
(Comp Nr/Finish:
) |
2002 - Category: GASSER, Type: SN, Class: A/GS, Div: 2 |
| "NiteFire" Owned by Rickey Bowie
from
Greenwood, South Carolina
USA
| Crew Chief: Rickey Bowie |
| '48 Ford Anglia by
an Unknown chassis builder |
Powered by Supercharged Alcohol 355 Chevrolet with
4 speed manual transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
5.471 at Unknown |
1/8 Mile MPH: |
129.85 at Unknown |
|
|
Entry's 2002 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.95,
MPH 31.71 |
Entry is 1.12341 times average ET and 0.97632 times average MPH |
|
| 2002 Records: |
1/4 Mile: 6.700 ET, 208.97 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.750 ET, 149.00 MPH |
| 2002 Average: |
1/4 Mile: 7.390 ET, 186.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.870 ET, 133.00 MPH |
| 2002 Minimum: |
1/4 Mile: 8.080 ET, 170.12 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 5.200 ET, 124.56 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Blown small block. Cool second set of plugs ignite exhausts to produce flames. |
|
Submitted by Draglist Archives, Last updated on Saturday, November 23, 2013, 02:40:32 PM by
Super Crew.
|
| 12459
EDIT THIS!
|
No Photo (Edit this to add one!)
|
Wendall Bowie (M) from
Mooresville, North Carolina
USA
(Comp Nr/Finish:
2389 ) |
2021 - Category: TOPDRAG, Type: PN, Class: Top Dragster, Div: 3 |
| "ECP Race Cars" Owned by Wendall Bowie
from
Mooresville, North Carolina
USA
| Crew Chief: Wendall Bowie |
| 2015 Dragster by
Page |
Powered by 632 Ford with
automatic transmission |
| 1/4 Mile ET: |
7.088 at NHRA Charlotte NC 5/16/21 |
1/4 Mile MPH: |
188.15 at NHRA Charlotte NC 5/16/21 |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 2021 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.96,
MPH 00.92 |
Entry is 1.14341 times average ET and 0.83622 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 2021 Records: |
1/4 Mile: 5.578 ET, 251.00 MPH |
1000 Ft. 0.000 ET, 212.03 MPH |
1/8 Mile: 3.614 ET, 204.32 MPH |
| 2021 Average: |
1/4 Mile: 6.199 ET, 225.00 MPH |
1000 Ft. 0.000 ET, 196.50 MPH |
1/8 Mile: 3.834 ET, 183.80 MPH |
| 2021 Minimum: |
1/4 Mile: 6.820 ET, 204.51 MPH |
1000 Ft. 0.000 ET, 181.62 MPH |
1/8 Mile: 4.164 ET, 169.23 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
No notes on this entry. |
|
Submitted by Danny White, Last updated on Sunday, September 25, 2022, 07:11:29 PM by
Danny White.
|
| 12460
EDIT THIS!
|
Auto Imagery Photog Web |
Wendell Bowie II (M) from
Mooresville, North Carolina
USA
(Comp Nr/Finish:
2389 ) |
2023 - Category: TOPDRAG, Type: PN, Class: Top Dragster, Div: 2 |
| "ECP Racecars" Owned by Wendell Bowie II
from
Mooresville, North Carolina
USA
| Crew Chief: |
| 2015 Dragster by
ECP Racecars |
Powered by Carbureted Gas 632 Ford with
automatic transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 2023 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 2023 Records: |
1/4 Mile: 5.578 ET, 251.00 MPH |
1000 Ft. 5.098 ET, 212.03 MPH |
1/8 Mile: 3.607 ET, 207.18 MPH |
| 2023 Average: |
1/4 Mile: 6.199 ET, 225.00 MPH |
1000 Ft. 5.126 ET, 196.50 MPH |
1/8 Mile: 3.834 ET, 183.80 MPH |
| 2023 Minimum: |
1/4 Mile: 6.820 ET, 204.51 MPH |
1000 Ft. 5.546 ET, 181.62 MPH |
1/8 Mile: 4.164 ET, 169.23 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
No notes on this entry. |
|
Submitted by Rob McCabe, Last updated on Tuesday, January 28, 2025, 09:28:45 PM by
Rob McCabe.
|
| 12461
EDIT THIS!
|
Auto Imagery Photog Web |
Wendell Bowie II (M) from
Mooresville, North Carolina
USA
(Comp Nr/Finish:
2389 ) |
2025 - Category: TOPDRAG, Type: PN, Class: Top Dragster, Div: 2 |
| "ECP Racecars" Owned by Wendell Bowie II
from
Mooresville, North Carolina
USA
| Crew Chief: |
| 2015 Dragster by
ECP Racecars |
Powered by Carbureted Gas 632 Ford with
automatic transmission |
| 1/4 Mile ET: |
7.069 at NHRA Charlotte NC 4/25/25 |
1/4 Mile MPH: |
187.29 at NHRA Charlotte NC 4/25/25 |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 2025 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.96,
MPH 00.92 |
Entry is 1.14035 times average ET and 0.83240 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 2025 Records: |
1/4 Mile: 5.578 ET, 251.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.607 ET, 207.18 MPH |
| 2025 Average: |
1/4 Mile: 6.199 ET, 225.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.834 ET, 183.80 MPH |
| 2025 Minimum: |
1/4 Mile: 6.820 ET, 204.51 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.164 ET, 169.23 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: 20. 7.069 187.29 NHRA 4 Wides Charlotte NC 4/25/25 (Semis) |
|
Submitted by Rob McCabe, Last updated on Sunday, May 4, 2025, 01:43:22 PM by
Rob McCabe.
|
| 12462
EDIT THIS!
|
Auto Imagery Photog Web |
Wendell Bowie II (M) from
Mooresville, North Carolina
USA
(Comp Nr/Finish:
2389 ) |
2026 - Category: TOPDRAG, Type: PN, Class: Top Dragster, Div: 2 |
| "ECP Racecars" Owned by Wendell Bowie II
from
Mooresville, North Carolina
USA
| Crew Chief: |
| 2015 Dragster by
ECP Racecars |
Powered by Carbureted Gas 632 Ford with
automatic transmission |
| 1/4 Mile ET: |
7.121 at NHRA D2 Orlando FL 2/28/26 |
1/4 Mile MPH: |
186.82 at NHRA D2 Orlando FL 2/28/26 |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 2026 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.96,
MPH 00.91 |
Entry is 1.14873 times average ET and 0.83031 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 2026 Records: |
1/4 Mile: 5.578 ET, 251.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.607 ET, 207.18 MPH |
| 2026 Average: |
1/4 Mile: 6.199 ET, 225.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.834 ET, 183.80 MPH |
| 2026 Minimum: |
1/4 Mile: 6.820 ET, 204.51 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.164 ET, 169.23 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: 21. 7.121 186.82 NHRA D2 Orlando FL 2/28/26 (Second Round) |
|
Submitted by Rob McCabe, Last updated on Saturday, February 28, 2026, 08:16:03 PM by
Rob McCabe.
|
| 12463
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1960 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
168.94 at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1960 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 100.0 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1960 Records: |
1/4 Mile: 0.000 ET, 168.94 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1960 Average: |
1/4 Mile: 0.000 ET, 160.49 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1960 Minimum: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:32:50 AM by
Super Crew.
|
| 12464
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1961 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1961 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1961 Records: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1961 Average: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1961 Minimum: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:32:52 AM by
Super Crew.
|
| 12465
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1962 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1962 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1962 Records: |
1/4 Mile: 8.750 ET, 168.94 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1962 Average: |
1/4 Mile: 9.188 ET, 161.98 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1962 Minimum: |
1/4 Mile: 9.688 ET, 153.62 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:32:54 AM by
Super Crew.
|
| 12466
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1963 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1963 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1963 Records: |
1/4 Mile: 8.240 ET, 181.81 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1963 Average: |
1/4 Mile: 9.188 ET, 161.98 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1963 Minimum: |
1/4 Mile: 9.688 ET, 153.62 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:32:55 AM by
Super Crew.
|
| 12467
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1964 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1964 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1964 Records: |
1/4 Mile: 8.240 ET, 181.81 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1964 Average: |
1/4 Mile: 9.188 ET, 163.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1964 Minimum: |
1/4 Mile: 9.688 ET, 153.62 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:32:57 AM by
Super Crew.
|
| 12468
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1965 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1965 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1965 Records: |
1/4 Mile: 0.000 ET, 181.81 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1965 Average: |
1/4 Mile: 0.000 ET, 163.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1965 Minimum: |
1/4 Mile: 0.000 ET, 153.62 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:32:58 AM by
Super Crew.
|
| 12469
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1966 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1966 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1966 Records: |
1/4 Mile: 8.240 ET, 183.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1966 Average: |
1/4 Mile: 9.188 ET, 168.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1966 Minimum: |
1/4 Mile: 9.688 ET, 153.62 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: Article in 10/6/66 Drag Times has Bowker losing a match race to the Chevy-powered bike of E.J. Potter ("The Michigan Madman") at Motor City Dragway in St. Clair, Michigan. - RT | Info added by Dan Bowker 2/22/2014: Photo plus text: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan |
|
Submitted by Ron Thums, Last updated on Sunday, November 3, 2019, 10:30:15 AM by
Dan Bowker.
Approved by Bill Pratt. |
| 12470
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1967 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1967 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1967 Records: |
1/4 Mile: 8.240 ET, 183.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1967 Average: |
1/4 Mile: 8.990 ET, 168.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1967 Minimum: |
1/4 Mile: 9.688 ET, 155.06 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:00 AM by
Super Crew.
|
| 12471
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1968 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1968 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1968 Records: |
1/4 Mile: 8.240 ET, 183.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1968 Average: |
1/4 Mile: 8.990 ET, 168.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1968 Minimum: |
1/4 Mile: 9.688 ET, 155.06 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:01 AM by
Super Crew.
|
| 12472
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1969 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1969 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1969 Records: |
1/4 Mile: 0.000 ET, 250.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1969 Average: |
1/4 Mile: 0.000 ET, 192.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1969 Minimum: |
1/4 Mile: 0.000 ET, 155.06 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:02 AM by
Super Crew.
|
| 12473
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1970 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1970 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1970 Records: |
1/4 Mile: 8.240 ET, 250.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1970 Average: |
1/4 Mile: 8.990 ET, 192.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1970 Minimum: |
1/4 Mile: 9.688 ET, 177.22 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:04 AM by
Super Crew.
|
| 12474
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1971 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1971 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1971 Records: |
1/4 Mile: 6.990 ET, 250.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1971 Average: |
1/4 Mile: 8.990 ET, 192.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1971 Minimum: |
1/4 Mile: 9.688 ET, 177.22 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:05 AM by
Super Crew.
|
| 12475
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1972 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1972 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1972 Records: |
1/4 Mile: 6.990 ET, 250.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1972 Average: |
1/4 Mile: 8.680 ET, 192.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1972 Minimum: |
1/4 Mile: 9.688 ET, 177.22 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:06 AM by
Super Crew.
|
| 12476
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1973 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1973 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1973 Records: |
1/4 Mile: 6.990 ET, 250.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1973 Average: |
1/4 Mile: 7.990 ET, 200.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1973 Minimum: |
1/4 Mile: 8.990 ET, 177.75 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:08 AM by
Super Crew.
|
| 12477
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1974 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1974 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1974 Records: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1974 Average: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1974 Minimum: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:09 AM by
Super Crew.
|
| 12478
EDIT THIS!
|
Dan Bowker Collection |
Dan Bowker (M) from
Owosso, Michigan
USA
(Comp Nr/Finish:
) |
1975 - Category: EXHIBITION, Type: ON, Class: Exhibition, Div: 3 |
| "Dan Bowker" Owned by Dan Bowker
from
Owosso, Michigan
USA
| Crew Chief: Dan Bowker |
| Harley-Davidson Motorcycle by
Logghe Stamping Co. |
Powered by Injected Nitro 427 Ford Wedge with
direct drive |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1975 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1975 Records: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1975 Average: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1975 Minimum: |
1/4 Mile: 0.000 ET, 0.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
Notes: I hardly ever kept track of my ET or mph. Most of the time I ran the bike was for exhibition and just smoked most of the 1/4 mile and didn't get much traction with the old M&H tires. When I first started riding the bike I found out when it started to hook up it would raise the front wheel, so after that, when I felt the engine start to bough I'd just roll on more power and keep the tire loose. I learned that lesson the hard way. About the first time I made a hard pass, it hooked up, I pulled the chute, the bike stopped and I slid for 700 feet. I went through the lights on my, butt at 168.94 (I remember that pass). That was when I added the air dam over the front wheel. That fixed the problem and kept the forks pretty much squashed. So as long as I was not racing anyone I just let it eat. Most promoters just wanted to see smoke anyway. I built the bike in 1960 and ran it until about 1975 I guess. I was in Gainesville Fl. And tipped the can a tad too much and blew my cool injected motor to pieces. I sold it to a Friend here in Florida to restore it. He sold it to Bruce Della in Mass. I am not sure who has it now. I lived in Owosso, Michigan, when I built the bike and had Logghe Stamping Co. build the frame. I was one of the first to use a Crowerglide clutch. Thanks, Dan, 2/22/14 |
|
Submitted by Bill Pratt, Last updated on Sunday, November 3, 2019, 10:33:10 AM by
Super Crew.
|
| 12479
EDIT THIS!
|
No Photo (Edit this to add one!)
|
Bruce Bowler (M) from
Denver, Colorado
USA
(Comp Nr/Finish:
551 ) |
1996 - Category: ALKYDRAG, Type: DN, Class: TA/D, Div: 2 |
| "Frank Hawley's Drag Racing School" Owned by Frank Hawley
from
Gainesville, Florida
USA
| Crew Chief: Ronnie Swearingen |
| '94 Dragster by
Murf McKinney |
Powered by Supercharged Alcohol 526 BAE Keith Black Hemi by Ronnie Swearingen with
3 speed manual transmission |
| 1/4 Mile ET: |
6.540 at Gainesville FL 1996 |
1/4 Mile MPH: |
206.00 at Gainesville FL 1996 |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1996 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.97,
MPH 00.94 |
Entry is 1.11776 times average ET and 0.86704 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1996 Records: |
1/4 Mile: 5.550 ET, 253.73 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 3.990 ET, 190.67 MPH |
| 1996 Average: |
1/4 Mile: 5.851 ET, 237.59 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.189 ET, 181.14 MPH |
| 1996 Minimum: |
1/4 Mile: 6.351 ET, 218.89 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 4.519 ET, 167.91 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
No notes on this entry. |
|
Submitted by Draglist Archives, Last updated on Saturday, August 28, 2021, 12:07:19 PM by
Super Crew.
|
| 12480
EDIT THIS!
|
No Photo (Edit this to add one!)
|
Bruce Bowler (M) from
Denver, Colorado
USA
(Comp Nr/Finish:
551 ) |
1997 - Category: AFUELDRAG, Type: XN, Class: A/FD, Div: 5 |
| "Tak's Toy" Owned by Tak Shiramizu & John McLaughlin
from
Denver, Colorado
USA
| Crew Chief: Tak Shiramizu |
| '94 Dragster by
JOMAC Racing |
Powered by Injected Nitro 500 Keith Black Hemi with
2 speed manual transmission |
| 1/4 Mile ET: |
Unknown at Unknown |
1/4 Mile MPH: |
Unknown at Unknown |
| 1000 FT ET: |
Unknown at Unknown |
1000 FT MPH: |
Unknown at Unknown |
| 1/8 Mile ET: |
Unknown at Unknown |
1/8 Mile MPH: |
Unknown at Unknown |
|
|
Entry's 1997 Performance Ratings (0 to 100) based on comparison to average ET/MPH:
|
|
1/4 Mile Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
1000 FT Rating: ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
| 1/8 Mile Rating:
ET 00.00,
MPH 00.00 |
Entry is 0.00000 times average ET and 0.00000 times average MPH |
|
| 1997 Records: |
1/4 Mile: 5.381 ET, 270.51 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1997 Average: |
1/4 Mile: 5.787 ET, 238.00 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
| 1997 Minimum: |
1/4 Mile: 6.287 ET, 219.07 MPH |
1000 Ft. 0.000 ET, 0.00 MPH |
1/8 Mile: 0.000 ET, 0.00 MPH |
|
|
No Racer Website |
No video link |
Web Search
|
Web Image Search
|
Web Video Search
|
|
No notes on this entry. |
|
Submitted by Draglist Archives, Last updated on Sunday, July 19, 2020, 11:40:23 AM by
Super Crew.
|
|