Green Racing's Anglia Gasser
Cool... bp
Bill Pratt
Draglist.com - Crowdsourced drag racing history.
Headlines and Results: http://www.draglist.com/
Drag Lists: http://www.draglist.com/draglist/draglist.php
Draglist.com - Crowdsourced drag racing history.
Headlines and Results: http://www.draglist.com/
Drag Lists: http://www.draglist.com/draglist/draglist.php
-
Bob Kraemer
- Posts: 1231
- Joined: Fri Feb 24, 2006 11:14 am
- Location: Cincinnati, Ohio
you'll have yours on the track before we get our junk fired up for the first time this year.
-
greenracing
- Posts: 782
- Joined: Thu Mar 02, 2006 12:50 pm
- Location: NE Ohio
Mallory? She was a little heavy as I remember... 
Oh I wouldn't bet me getting together before you Bob - this thing has a way of prolonging every little thing it can
I talked to the engine shop yesterday to get more details on the crank. It turns out that I got the story backwards - my rods are heavier than the crank was set up for and they have to add weight to the crank. I couldn't figure out what they're waiting for - it's not like I'm gonna say "oh - hang on and let me get a lighter set of rods to make your job easier".
Oh I wouldn't bet me getting together before you Bob - this thing has a way of prolonging every little thing it can
I talked to the engine shop yesterday to get more details on the crank. It turns out that I got the story backwards - my rods are heavier than the crank was set up for and they have to add weight to the crank. I couldn't figure out what they're waiting for - it's not like I'm gonna say "oh - hang on and let me get a lighter set of rods to make your job easier".
-
Rapid Randy Baker
- Posts: 8075
- Joined: Thu Feb 23, 2006 9:05 am
- Location: Des Moines, Iowa
- Contact:
-
jim sanders
- Posts: 8740
- Joined: Fri Feb 24, 2006 8:54 am
- Location: St.Louis Mo.
- Contact:
-
Bob Kraemer
- Posts: 1231
- Joined: Fri Feb 24, 2006 11:14 am
- Location: Cincinnati, Ohio
-
greenracing
- Posts: 782
- Joined: Thu Mar 02, 2006 12:50 pm
- Location: NE Ohio
man...
I was getting stuff done, things were falling into place, looking forward to getting it out to the track in a few weeks, and....
I found out that my crank can't be balanced to my combo. My combo is apparantly heavier than what the crank was balanced for - which I can beleive because those BME fuel rods are some hefty looking things - and they need to add about 200g to the counter weight. Problem is - they can't add any more weight because the last balancer added a lot of weight in this nice little row of plugs, and there's no room to put a bigger plug in it. The crank will make a nice crank for someone with a lighter combination, but it's not going to work for me.
Since I've got a new set of BME rods, and a new set of Arias pistons, I'm pretty much set with the stroke that I've got. It's hard enough to find a 392 crank, let alone a 1/4" stroker (4.150 stroke). I think I may have to just bite the bullet and order a new crank. It'll be better to have all new stuff anyway I suppose. Unfortunately lead time on a crank is probably 2-3 months.
I'm going to start calling around this afternoon and see what I can find, but right now it looks like we're on hold for a bit.
Guess I'll be crewing on the rail for a few months...
Perry
I was getting stuff done, things were falling into place, looking forward to getting it out to the track in a few weeks, and....
I found out that my crank can't be balanced to my combo. My combo is apparantly heavier than what the crank was balanced for - which I can beleive because those BME fuel rods are some hefty looking things - and they need to add about 200g to the counter weight. Problem is - they can't add any more weight because the last balancer added a lot of weight in this nice little row of plugs, and there's no room to put a bigger plug in it. The crank will make a nice crank for someone with a lighter combination, but it's not going to work for me.
Since I've got a new set of BME rods, and a new set of Arias pistons, I'm pretty much set with the stroke that I've got. It's hard enough to find a 392 crank, let alone a 1/4" stroker (4.150 stroke). I think I may have to just bite the bullet and order a new crank. It'll be better to have all new stuff anyway I suppose. Unfortunately lead time on a crank is probably 2-3 months.
I'm going to start calling around this afternoon and see what I can find, but right now it looks like we're on hold for a bit.
Guess I'll be crewing on the rail for a few months...
Perry
Return to “Super Crew Team Reports”
Who is online
Users browsing this forum: No registered users and 3 guests