the flyin hillbilly raysun teem, and the old junk chevelle

flyinhillbilly · Postby **flyinhillbilly** » Mon Apr 10, 2006 10:44 pm

91 i think i'll ask him some more questions next time i see him, should be this week, he shook so hard that he broke the hinge off of the driver door so now i get to fix it, can you send me a link to his info please?

YouTube · Postby **draglist** » Mon Apr 10, 2006 10:48 pm

Cool... here is the link. bp

http://www.digitalwebzone.com/draglist/ ... LUPWHO1ST=

flyinhillbilly · Postby **flyinhillbilly** » Fri Apr 14, 2006 1:41 pm

got the 3rd member all set up, and the tabs to mount the rearend welded on

Lippy · Postby **Lippy** » Sat Apr 15, 2006 9:52 am

Hillbilly, do you have a plan as to when your Chevelle will be goin?

flyinhillbilly · Postby **flyinhillbilly** » Sat Apr 15, 2006 9:09 pm

lookin like friday night, the new 9" is hung and sprung, all the new battery cables are ran, gears and bearings are in, i'd probably still be out there workin on it had i not drank so many coronas. still have to build the new driveshaft, mount front and rear shocks, instALL two tube sleeves and nuts on the fuel line, weld in some sheetmetal where the floors used to be, mount the fuel cell and battery seculey, and race!

jim sanders · Postby **jim sanders** » Sat Apr 15, 2006 9:35 pm

how come everytime i read a Flyin' Hillbilly post i have to scroll to the end of my driveway to read it

YouTube · Postby **draglist** » Sun Apr 16, 2006 12:11 am

It's my fault for putting the web link in the earlier post. Since there are no breaks in it, it forces us to the end of the page. Now that we are on a new page, that problem won't be there. bp

flyinhillbilly · Postby **flyinhillbilly** » Sun Apr 16, 2006 8:16 pm

just pulled the old junk chevelle out of the shop UNDER IT"S OWN POWER!!! eating now, fixin to go clean shop a bit and pull her back in , looks like i'm racing friday night barring any disasters. big transbrake burnout out of the shop was pretty cool too.yeeeeeeeeeeeeeeeeehaaaaaaaaaaaaw!!

Billy Mac · Postby **Billy Mac** » Mon Apr 17, 2006 9:06 am

lol...Careful of those tranny-brake launches in the shop, Flyin'......we broke a Dana in our shop doing that

(and it's slick concrete in there

)

flyinhillbilly · Postby **flyinhillbilly** » Mon Apr 17, 2006 10:08 pm

just went for my first ride in the ojc about an hour ago, absolutely scared the hell out of myself, there is a bluff that drops about 30 feet on one side of the road below my driveway, i made it about 25 feet out after launching, and the tires unloaded, i short shifted hoping to reighn it back in but it went the other way, from one side of the road to the other across the yellow line TWICE! nearly went off the bluff, i've been off it once before and it's no fun, but that car HAULS!!! some minor tweeking, and i think i'll be ready to race friday night.

the flyin hillbilly raysun teem, and the old junk chevelle

Who is online