Sin City Vette AA/FC

Here's where our individual members can fill us in on their racing, car building, or other exploits.
Post Reply
User avatar
jim sanders
Posts: 8740
Joined: Fri Feb 24, 2006 8:54 am
Location: St.Louis Mo.
Contact:
Contact jim sanders

Re: Sin City Vette AA/FC

Postby jim sanders » Sun Apr 10, 2011 4:25 pm

nice work on the hatch deal WOW
GOOD TO GO !!
Uncle Curt Wasson album
[url=http://www.glowfoto.com/users2/gatorgumbo][img]http://www.glowfoto.com/siteimages/linktogallery.gif[/img][/url]
Top
User avatar
23t
Posts: 1393
Joined: Wed Aug 20, 2008 5:35 pm
Location: ohio
Contact:
Contact 23t

Re: Sin City Vette AA/FC

Postby 23t » Sun Apr 10, 2011 7:30 pm

Since I'm a part of the team, :mrgreen: I have alot of questions! What is the burst panel for in front of the blower opening? I seen them blow before. Is it to aid in keeping the body on the car if the blower or motor goes POP? Ron Capps already answered my question about the extra lever on the brake lever. Should have known that one! :roll:
Top
Rapid Randy Baker
Posts: 8075
Joined: Thu Feb 23, 2006 9:05 am
Location: Des Moines, Iowa
Contact:
Contact Rapid Randy Baker

Re: Sin City Vette AA/FC

Postby Rapid Randy Baker » Sun Apr 10, 2011 8:28 pm

Yes, the panel in the hood is to let the pressure blow out from under the body without taking the body with it. It is held down with plastic screws and nuts.

Yes, I am sure Ron told you that is the fire bottles lever. :D

The other lever on the right side is used for something different. :wink:

Rapid
NITRO PILOT

[url]http://.www.rapidrandy.net[/url]
Top
mrnorm
Posts: 48
Joined: Mon Nov 01, 2010 9:12 pm

Re: Sin City Vette AA/FC

Postby mrnorm » Sun Apr 10, 2011 9:10 pm

There is also a burst panel deflector on the intake manifold that will direct the pressure down should it ever be needed. :roll:
Top
Rapid Randy Baker
Posts: 8075
Joined: Thu Feb 23, 2006 9:05 am
Location: Des Moines, Iowa
Contact:
Contact Rapid Randy Baker

Re: Sin City Vette AA/FC

Postby Rapid Randy Baker » Sun Apr 17, 2011 1:37 am

Finally got it into the paint booth for primer. 2-coats of epoxy primer to seal everything down. Then 2-coats of polyester primer surfacer to be able to sand without going through to the bare glass.

Image

Image

The window all trimmed out.

Image

Image

Image

Rapid
NITRO PILOT

[url]http://.www.rapidrandy.net[/url]
Top
User avatar
23t
Posts: 1393
Joined: Wed Aug 20, 2008 5:35 pm
Location: ohio
Contact:
Contact 23t

Re: Sin City Vette AA/FC

Postby 23t » Sun Apr 17, 2011 6:03 am

Looking good!!!!! 8) 8)
Top
User avatar
jim sanders
Posts: 8740
Joined: Fri Feb 24, 2006 8:54 am
Location: St.Louis Mo.
Contact:
Contact jim sanders

Re: Sin City Vette AA/FC

Postby jim sanders » Sun Apr 17, 2011 7:33 am

8) x2
GOOD TO GO !!
Uncle Curt Wasson album
[url=http://www.glowfoto.com/users2/gatorgumbo][img]http://www.glowfoto.com/siteimages/linktogallery.gif[/img][/url]
Top
User avatar
Mr. Jean
Posts: 4105
Joined: Fri Aug 11, 2006 8:06 am
Location: Sparks, Nevada

Re: Sin City Vette AA/FC

Postby Mr. Jean » Sun Apr 17, 2011 12:12 pm

8) 8) :mrgreen:
Jean Muntifering
#7897 Comp.
Old Comp Racer
Top
Greg Green
Posts: 279
Joined: Sat May 26, 2007 7:04 am
Location: Lee's Summit, MO.

Re: Sin City Vette AA/FC

Postby Greg Green » Sun Apr 17, 2011 1:54 pm

See, now aren't you glad I didn't come help with the body work? You wouldn't be this far along for another month fixing my mess ups...lol. Great Job!
Top
Rapid Randy Baker
Posts: 8075
Joined: Thu Feb 23, 2006 9:05 am
Location: Des Moines, Iowa
Contact:
Contact Rapid Randy Baker

Re: Sin City Vette AA/FC

Postby Rapid Randy Baker » Sun Apr 17, 2011 1:58 pm

Thanks 8)
NITRO PILOT

[url]http://.www.rapidrandy.net[/url]
Top
Post Reply

Return to “Super Crew Team Reports”

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB® Forum Software © phpBB Limited