Green Racing's Anglia Gasser

Here's where our individual members can fill us in on their racing, car building, or other exploits.
Post Reply
User avatar
pro70z28
Posts: 11682
Joined: Fri Feb 24, 2006 12:17 pm

Postby pro70z28 » Thu Nov 29, 2007 12:51 pm

Wheelz'. You know he'll do a V-A-R-O-O-M or 2 b4 it's back together. I'm the only one I know of that has NeVeR V-A-R-O-O-M-ed :lol: :lol: :oops: That's my story & I'm stickin' to it.

Great news Perry. Sounds like you'll be set for '08.
15th Annual DRAGLIST Nationals Sometime in 2020. Somewhere in the USA.
Top
Rapid Randy Baker
Posts: 8075
Joined: Thu Feb 23, 2006 9:05 am
Location: Des Moines, Iowa
Contact:
Contact Rapid Randy Baker

Postby Rapid Randy Baker » Thu Nov 29, 2007 6:52 pm

It sounds great Perry. Keep us informed on the progress, but it sounds like it is all coming together for you. 8)
NITRO PILOT

[url]http://.www.rapidrandy.net[/url]
Top
User avatar
draglist
Site Admin
Posts: 13794
Joined: Wed Feb 22, 2006 7:23 pm
Location: Waldorf MD
Contact:
Contact draglist

Postby draglist » Thu Nov 29, 2007 8:17 pm

Sounds great, Perry! bp
Bill Pratt
Draglist.com - Crowdsourced drag racing history.
Headlines and Results: http://www.draglist.com/
Drag Lists: http://www.draglist.com/draglist/draglist.php
Top
User avatar
Lippy
Posts: 3181
Joined: Thu Feb 23, 2006 8:52 pm
Location: KANSAS

Postby Lippy » Sat Dec 08, 2007 3:18 pm

Good to hear your back at it Perry!! :wink:
If you think it's exciting now, wait till we start it.
Top
User avatar
flyinhillbilly
Posts: 962
Joined: Wed Mar 29, 2006 9:21 pm
Location: northwest arkansas
Contact:
Contact flyinhillbilly

Postby flyinhillbilly » Mon Dec 10, 2007 12:16 am

now it just wouldn't be right not doing a vrooooooooooom or two, he's been out of that thing quite a while now.



vrooooooooooom, it does a racer good. :D
the police never think it's as funny as i do
Top
greenracing
Posts: 782
Joined: Thu Mar 02, 2006 12:50 pm
Location: NE Ohio

Postby greenracing » Mon Dec 10, 2007 8:02 am

I'll get the youngest out there - he'll sit in there and varoom forever - of course then my belts don't fit me anymore :roll:

Hacked at my pan a while... In it's last configuration, it wouldn't come off the engine in the car. I'm planning on frequent bearing checks with this engine, so it's going to come off in the car. I cut the front out and made a nice pattern out of cardboard - it still hits when I pull it down to clear the oil pump - more hacking required...
Top
greenracing
Posts: 782
Joined: Thu Mar 02, 2006 12:50 pm
Location: NE Ohio

Postby greenracing » Wed Jan 02, 2008 8:18 am

My new Titan oil pump arrived - it's one massive thing! I hung it off the bottom of the block to check pan clearance and found a small problem - the pickup is an inch off the bottom of the pan... And I gave them the measurements too - guess it'll go back for some adjustments. They sent me the wrong intermediate shaft too - for a 392 distributor when I'm running a small block distributor. A bit of misscommunication there, but we'll get it worked out.

I got a chunk of aluminum formed for the front of the pan. Just have to make a jig to bolt the pan down and it's time for some aluminum welding practice. It's been a while some it may not be too pretty ;)

Figured I'd better go through the heads so I can get them to the machine shop to get freshened up. They had been sitting in the corner and I'd kind of forgotten about them. It's a good thing I remembered - looks like I've got a few bent ones that will need replaced.

I got a new digital camera for xmas. Once I figure out how to use it I can post some pics of the mess I'm making :lol:
Top
User avatar
Mr. Jean
Posts: 4105
Joined: Fri Aug 11, 2006 8:06 am
Location: Sparks, Nevada

Postby Mr. Jean » Wed Jan 02, 2008 8:37 am

Sounds good. Looking forward to the pictures. 8)
Jean Muntifering
#7897 Comp.
Old Comp Racer
Top
Post Reply

Return to “Super Crew Team Reports”

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB® Forum Software © phpBB Limited